HD Athletic NX Squat Stand

• 2X3 Xmember
• The 2X3 Xmember should be used in facilities that plan to use camera-based training systems.Compatible with HD Athletic Ball Grips (HDT-BG3)

• Offset Bar
• Maximize space with the Offset Bar. With two 1.25” textured pull-up bars, this option provides both high and low pulling points with a 9” separation to compensate for lower training uprights.

• 2-HANDLE BAR
• A Hammer Strength classic, the 2-Handle pull-up bar features 1.25” handles in mixed configurations. This pull-up option features grips on each handle and embodies one of Hammer Strengths’ true design philosophies: supreme ergonomics.

• MONKEY BAR
• The most traditional of all pull-up bars. The Monkey Bar has high versatility and is the lowest cost option. The bar is 1.25” in diameter and uses a high-wear, textured paint to enhance grip and extend the finish life.

• Premium HR Bar Catches
• Premium Half Rack Bar Catches are 22” (56 cm) long and feature a three-sided urethane guard that protects both the catch and the barbell. Two shock absorption pads and vertical displacement brackets prevent damage to the rack. The Premium Catch attaches with a pin through the side of the rack for added strength and stability. The finish is durable high-wear charcoal powder coating with a chrome pin. ASTM rated to 495 lbs.

• Standard HR Bar Catches
• The Standard Half Rack Bar Catches are 18” (46 cm) in length and use a 3-sided urethane guard to shield the catch and the bar. The catch pins easily from the face of the rack and locks in place. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. ASTM rated to 405 lbs.

• Premium Bar Supports
• The Premium Bar Support is a welded ½” plate protected by an oversized, injection-molded urethane cover for bar protection. The landing area is a 2” resting zone that tapers to 1.5” for wider hand clearance. The finish is a durable high-wear charcoal powder coating with a chrome pin. The interior is wrapped with 3/8” urethane paint guards to prevent any metal-on-metal contact with the rack.

• Standard Bar Supports
• The Standard Bar Support is a welded 3/8” plate protected by an injection-molded urethane cover for bar protection. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. The profile of the landing and resting zone are ASTM and EN compliant.

HD Athletic NX Power Power Combo Rack

HD Athletic NX Power Half Combo Rack

HD Athletic NX Half Half Combo Rack

HD Athletic NX Power Rack

HD Athletic NX Half Rack

HD ELITE iD

HD Leichtathletik

HD Elite iD Combo Rack

HD Athletic NX Half Rack

HD Athletic NX Power Rack

HD Athletic NX Half Half Combo Rack

HD Athletic NX Power Half Combo Rack

HD Athletic NX Power Power Combo Rack

Multi-Adjustable Bench

Produkt eingestellt: HD Athletic Rigs

HD Perimeter